Synthetic Pitch Divider System

Designed to be installed outside of the perimeter fence and can hang netting with minimal sag over a span of up to 63m.

3m high x 100mm square posts manufactured from 4mm thick galvanised steel that are polyester powder coated green. The winch posts is fitted with a winch and top pulley wheel, the dummy post is complete with pulley wheel and cleat. The winch has enclosed gears for added safety, detachable handle and a maximum load rating restricted to 100kg. 

Pitch divider systems must be installed in minimum 1m cube of concrete, consult a structural engineer for advice where required.

The posts are designed to be concreted directly in the ground but ground sockets can be supplied separately at an additional cost. To help alleviate billowing of the net we recommend the use of a bottom band with sewn in 18mm rope